Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Union
A broken garage door spring in Union usually shows up the same way: the door won’t lift, or it drops hard and won’t stay up. We repair and replace torsion and extension springs on Union doors, and we handle the heavy, oversized, and retrofit doors that a lot of general handymen won’t touch. Our technicians have up to 11 years of experience, and they’ll match the right spring to your specific door before any work starts.
Union spreads out. Acreage properties on the rural fringe, tight subdivision streets closer in, longer drives to some garages than others. We know the area and we plan the trip so your spring gets fixed in one visit rather than two. Call (844) 681-4337 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Union Homeowners Call Florence Garage Door Repair Pros for Garage Door Spring Repair
Spring work is one of the more mechanically dangerous jobs on a garage door, and it’s the one place where a generalist can get hurt or leave a door badly out of balance. We treat it as a specialty, not a sideline. That matters on Union’s heavier doors especially, where a mismatched spring can strain an opener until it fails.
We’re set up to serve Union properly: a real local response, clear pricing, and one company that handles the spring, the cables, the rollers, and the opener rather than sending you to three different contractors. We work on the brand you already have, including Chamberlain, Genie, Clopay, and Amarr systems, so there’s no runaround if your opener turns out to be part of the problem.
Homeowners in Union tend to want it done right and done once. That’s how we approach every visit: measure, match the right part, test the balance, and confirm the door runs clean before we leave.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Union
Every spring job starts with a proper look at the whole system, not just the snapped coil. Here’s what we handle across Union.
Torsion Spring Replacement in Union
Most Union subdivision doors run on a torsion spring mounted above the door, and when that spring reaches the end of its cycles the door stops lifting. We measure wire size, inside diameter, and length to match the correct replacement rather than guessing from a chart. On a matched pair, both springs are usually replaced together so the door stays balanced.

Extension Spring Replacement in Union
Older Union homes, especially the scattered farmhouses and small ranches on the outskirts, often have extension springs running along the sides of the track. These stretch and snap over time, and they need proper safety cables so a broken spring can’t fly loose. We replace the pair and fit new cables as part of the job.

Broken Spring Repair in Union
A snapped spring is the most common reason a Union door suddenly won’t open. We diagnose whether it’s the spring itself, a worn cable, or a drum that’s out of line, then repair or replace what’s actually failed. That means you’re not paying to swap a spring when the real culprit is a dragging roller or a bent track.

Spring Adjustment in Union
Sometimes the spring hasn’t broken but the door has gone out of balance, closing too fast or opening unevenly. We re-tension the springs, check the end bearing plates, and confirm the door holds position at the halfway point. It’s a small adjustment that adds life to the whole system.
Trusted Brands We Service in Union
We service equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which covers nearly every system you’ll find in a Union home. We don’t stock parts locally; instead we identify the exact spring or component your door needs and get it sorted quickly. That approach works better on Union’s mixed housing stock, where a standard builder door and a retrofitted rural door can need completely different parts. One call, one company, and no referral runaround to a separate installer.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Spring Repair Problems We See in Union Homes
- Aging builder-grade torsion springs in the subdivisions. Union’s 1990s to 2010s subdivisions are now hitting the 15 to 20 year mark, and the first thing to fail is usually the original torsion spring rather than the door panels. Worn nylon rollers often go at the same time, dragging the door out of balance and making the opener work harder.
- Retrofit and non-standard openings on the rural fringe. The older farmhouses and small ranches around Union often have field-modified framing and headers, so spring and drum geometry has to be measured on site. You can’t order these off a stock chart; guessing gets the wrong spring and a door that still won’t balance.
- Freeze-thaw and road salt on steel doors. Northern Kentucky’s winter swings pull snow melt and road salt onto the bottom of steel doors and pool it inside the garage, and that corrosion creeps into the hinges and bottom brackets. Rusted hardware adds drag that loads the springs unevenly over time.
- Summer humidity swelling wooden carriage-house doors. The humid months make timber doors swell and stick, which puts uneven tension on the springs as the door fights the frame. Left alone, that sticking wears the springs faster than normal cycling would.
Pricing for Garage Door Spring Repair in Union, KY
Spring repair in Union typically runs $160 to $305 for a single spring, and that’s an estimate, not a fixed figure. Because springs usually come in matched pairs, replacing both is about twice that range. What moves the number within the range is the type of spring, the door’s weight, and whether cables or rollers need attention at the same time.
Here’s how the common line items break down for a Union job:
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $160 – $305 |
| Cable Repair | $115 – $225 |
| Roller Replacement | $100 – $200 |
| Track Realignment | $110 – $215 |
The price is quoted and agreed before any work starts, so the written estimate sets the final number. Estimates are free. Call (844) 681-4337 to book yours.
We Also Serve Cities Near Union
Union sits close to several other Northern Kentucky communities we look after, including Florence, Burlington, Oakbrook, and Elsmere. If you’re just outside Union and want the same spring repair done properly, we can help. You can also read more about our full garage door spring repair service and see the wider Union area we cover.
Serving Union, KY – Our Local Coverage Area
We serve Union and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Union
Very likely, yes. In Union’s 1990s to 2010s subdivisions, an 18-year-old door is often still on its original builder-grade torsion spring, and a weakening spring forces the opener to lift more of the door’s weight than it should. Worn nylon rollers usually contribute too. It’s worth having both checked before the opener itself burns out; call (844) 681-4337 for a free estimate.
Often it does. Rural-fringe homes around Union frequently have retrofitted or non-standard openings with field-modified headers and spring anchor plates, so the correct spring depends on measurements taken on site, not a standard chart. That’s why we measure wire size, inside diameter, and drum before ordering anything.
On a heavy or oversized door, a higher-cycle spring is usually the better choice because it lasts through more open-and-close cycles before it fatigues. If your Union property has a large or heavy door, we’ll talk through the cycle rating that fits how often you use it, rather than defaulting to the cheapest spring. Call (844) 681-4337 and we’ll price both options.
A single spring repair in Union typically runs $160 to $305, and that covers one spring. Matched pairs are usually replaced together, so a pair costs about twice that range. The written estimate sets the final price and is agreed before work starts; estimates are free, so call (844) 681-4337 for an exact quote.
A proper spring visit should include setting both springs, re-tensioning the cables, checking the end bearing plates and track alignment, and confirming the door is balanced before anyone touches the opener rail. On Union’s retrofit doors that also means verifying the drum and anchor geometry. If a visit stops at just swapping the spring, ask what else is being checked.
When a spring lets go in Union, the door stops working and the whole garage becomes a problem to sort out. Call (844) 681-4337 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll match the right spring to your specific door.
Written by the team at Florence Garage Door Repair Pros.